|
|
|
|
|
|
|
|
|
|
|
|
Products | Drip Irrigation | Power Filters  |  Power Filter With Engine
Features
 
• Self-Cleaning with automatic back wash.
• Programmable controller.
• Low pressure-loss.
• Wide filtration area.
• Maximum cleaning with vacuum cleaning.
• Stainless chromium nickel cartridge
• Easy maintenance.
• Continue to filtration during back wash.
 
Working Principle
 
After keeping the big particles at inlet of filter, multi-layer steel screen perform the thin filtration process.

There is seen pressure difference between inlet and outlet after covered by particles to the surface of screen. Back wash process starts after the signal of pressure difference received with the help of sensor.

Cleaning is done by nozzles which are moving as spirally in thin screen. During this process, the valve, which is automatically opened, creates high-speed flow at the tips of nozzles and helps to vacuum particles. Filtration continues during 40 sec. back wash process
Technic Table
Kod
Code		 Giriş / Çıkış
  Inlet / Outlet		 Filtre Uzunluğu
  Filter Length
  ( mm )		 Filtre Yüksekliği 
Filter Height 
( mm )		 Maks. Debi
  Max. Flow Rate
  ( m³/h )		 Yüzey Alanı 
Filtration Surface 
( cm² )		 Sandık Ölçüleri 
Box Dimensions
  cm ( H-W-L )		 Ağırlık
Weight
(kg)
inch dn
MFM4000 4” Ø114 2100 880 100 4200 50-50-220 100
MFM5000 5” Ø141 2100 880 140 4200 50-50-220 105
MFM6000 6” Ø165 2465 880 180 6300 50-50-260 115
Products Properties








Gövde Malzemesi
  Body Material		 St 37
Elek Malzemesi 
Screen Material		 Paslanmaz Çelik
Stainless Steel
Maximum Çalışma Basıncı 
Max. Working Pressure		 8 bar
Minimum çıkış basıncı
  Min. Outlet Pressure		 2,5 bar
Minumum Çalışma Sıcaklığı 
Min. Working Temperature		 0 °C
Maximum Çalışma Sıcaklığı
Max. Working Temperature		 60 °C
Süzme Hassasiyeti
Filtration Degree		 130 micron
Boya Malzemesi 
Coating Material		 Polyester Statik Toz Boya